Details introduction
PU sealing Rockwool rockwool wall panels is a composite building board, with rock wool as the core material, sealed around by polyurethane material, and often covered with metal or non-metal surface layer. It is widely used in external walls, roofs and internal partitions of industrial and civil buildings, with thermal insulation, fire and sound insulation and structural support functions.
Structure composition:
Core material: rock wool (made of basalt fiber, fire grade A1, high temperature resistance up to 1000℃).
Edge sealing material: polyurethane (PUR/PIR), through high pressure foam sealing edge, enhance air tightness, water resistance and structural strength.
Surface layer: galvanized steel plate and colored steel plate to provide protection and decorative effect.
Product parameters
|
Product parameter |
|
|
Outer Steel plates thickness |
0.3 mm to 0.7 mm |
|
Inner Steel plates thickness |
0.3 mm to 0.7 mm |
|
Core material thickness: |
50mm/75mm/100mm/120mm |
|
Effective width: |
1000mm |
|
Length: |
Customizable(No more than container length(11.8m)) |
|
Color: |
White, gray, silver gray, Customized Colors |
|
Density: |
100-140kg/m³ |
Product version
A variety of appearance effects, can be customized, three decorative seam effects can be selected.


Product features
Excellent fire performance: PU sealing Rockwool rockwool wall panels,rock wool core material reaches A1 level non-combustible standard, polyurethane edge adopts flame retardant formula (B1 level), the whole passed GB 8624-2012 fire test, suitable for high-rise and densely populated places.
Good thermal insulation: rock wool thermal conductivity is low (0.035-0.045W /m·K), polyurethane edge sealing further reduces edge heat loss, and the overall heat transfer coefficient is reduced by 15%-20% compared with traditional rock wool board.
Sound insulation and sound absorption effect is significant: polyurethane double-side sealing rock wool sandwich board has a significant reduction in noise transmission, especially suitable for designated flights through the place. In addition, after the rock wool roof board is used, the indoor sound caused by the impact of rain and hail on the roof steel plate of the building is also significantly weakened. According to the test, according to ISO 717/82 and UNI 8270/7 standards, the sandwich board with a density of 120kg/m3 rock wool as the core material is selected, and the sound insulation effect can reach RW=29~30 dB.
Rock wool sandwich board also has a good sound absorption effect, it can absorb the sound in a wide range of frequencies. According to ISO 354/85, the sound absorption performance level of rock wool sandwich board reaches DELTA LA=15.7 dB(A).
Long-term moisture resistance and durability
The closed cell rate of polyurethane is > 90%, effectively blocking water vapor penetration, and the moisture content of rock wool is maintained < 1% for a long time to avoid performance attenuation. Metal panel salt spray resistance test more than 1000 hours, adapt to humid coastal environment.
(5) Lightweight and high-strength structure
PU sealing Rockwool rockwool wall panels,the weight is only 15-20kg/m², the bending strength is more than 150kPa, and the large-span installation is supported (purlin distance can reach 3m), saving the cost of steel structure.
Core advantage
|
Compared to traditional rock wool board |
Compare polyurethane sandwich board |
|
✅ Edge sealing solves the problem of rock wool easy moisture absorption and joint heat leakage |
✅ Make up for the lack of pure polyurethane fire rating (Class A) |
|
✅ improve wind pressure resistance and edge strength |
✅ Both thermal insulation performance and fire protection requirements |
|
✅ Reduce installation losses (reduce field sealing) |
✅ Better sound insulation |
Suggestions for material selection and structure
1. Harsh environment selection:
Coastal/Chemical Industry zone: aluminized zinc steel plate (AZ150) +PVDF coating, polyurethane edge thickness ≥15mm.
Low temperature cold storage: core material density ≥120kg/m³, polyurethane closed cell ratio ≥95%, to avoid moisture intrusion resulting in ice expansion.
2. Special structural requirements :
Curved wall: flexible aluminum substrate (thickness ≤0.6mm) + transverse reinforcing rib is adopted, and the edge sealing layer is segmented foaming to adapt to arc.
Ultra-long slab: the length of the single board is less than or equal to 12m. A reinforcing rib is added every 2m on the back to prevent deformation during transportation.
Application scenarios

Industrial building

Large automotive electronics industrial park exterior wall panel

Subway station public facilities

Office building
Packing & Delivery

FAQ
1.Q: Are you factory or trading?
A: We have our factories. We have been providing professional products for 27 years.
2.Q:How I believe you?
A:We consider honest as the life of our company,there is trade assurance from Alibaba your order and money will be well guaranteed.
3.Q:Can you supply samples for test?
A:Yes ,we can.The samples are for fee,customer should take the freight cost.
4.Q: What is your method of Transportation?
A: We deliver by shipping,container,break bulk or as your requirements.
5.Q: How about the delivery time?
A:Different products have different delivery time.The products will be delivered as soon possible on the basis of the quality assurance.
Hot Tags: pu sealing rockwool rockwool wall panels, China pu sealing rockwool rockwool wall panels manufacturers, suppliers, factory, xps sandwich panel, fibreglass sandwich panels, frp foam core panels, panel sandwiches, honeycomb sandwich, powder coated puf panel


