Product Notes
Polyurethane cold room panels is very important for cold storage, because cold storage is different from ordinary warehouses. The temperature inside the cold storage is generally lower, and the requirements for air temperature, humidity, and environment are relatively high. Therefore, when choosing cold storage panels, we must pay attention to choosing polyurethane cold room panels with better temperature control . If the panels are not selected well, the temperature inside the cold storage is difficult to control, which can easily cause the products stored in the cold storage to deteriorate, or make the cold storage refrigeration compressor work frequently, wasting more resources and increasing costs. Choosing the right panels can better maintain the cold storage.
Specification
|
Cold Panle parameter |
|
|
Outer Steel plate thicknes |
0.3mm-0.8mm |
|
Inner Steel plate thickness |
0.3mm-0.8mm |
|
Steel plate material |
Coated color Steel, galvanized sheet, stainless steel,aluminum |
|
Core material |
PU |
|
Core material thickness |
50mm/75mm/100mm/120mm/150mm |
|
Effective width |
920mm/1000mm/1120mm |
|
Length |
Customized(No more than container length(11.8m)) |
|
Color |
White, Customized Colors |
|
Application |
Cold Room |
|
Steel Plate Selection (mm) |
Color-coated Steel Plate/Stainless Steel Plate/Color-coated Aluminum Plate |
How to choose cold storage board
The quality of polyurethane cold room panels directly affects the service life of the cold storage , and the three major factors affecting the quality of cold room panels are: bulk density, thickness of the protective panel and load-bearing performance.
Among them, bulk density is the most important factor affecting the quality of cold storage panels. Bulk density actually refers to the density of polyurethane . The national standard for polyurethane foam density is 40-42KG/cubic meter.
Product details display

Product application scenarios

Factory Showcase

Packaging and Delivery

Our advantages

Installation:
Cold storage board installation should be promoted in an orderly manner. First of all, it is necessary to accurately measure the size of the installation site to ensure that the specifications of the cold storage board match. The installation starts from the bottom of the library body, the library board is spliced one by one, and the special connector is tightly fixed to ensure that there is no gap between the board and the board to prevent the leakage of cold air. The installation of the library board in the corner should pay attention to the verticality, and calibrate with tools such as a level. Then install the top library board, need to build a stable scaffold to assist the operation, the installation personnel must tie the safety rope to ensure safety. After completing the splicing, carefully check all the splicing parts, seal the gap, such as applying sealant, to further enhance the tightness of the cold storage and ensure the good refrigeration effect of the cold storage.
FAQ
1.Q: Are you a factory or a trader?
A: We have our own factory. We have been providing professional products for 27 years.
2.Q: How can I trust you?
A: We have many cooperative customers for large projects, and we welcome customers to visit our factory for on-site inspection.
3. Q: Can you provide samples for testing?
A: Yes, we can. Samples need to be charged and customers should bear the shipping cost.
Hot Tags: polyurethane cold room panels, China polyurethane cold room panels manufacturers, suppliers, factory, coolroom panels used, cold storage panel installation, cold room panel installation, cold storage panels manufacturer, freezer room panels, cold store panels for sale


